发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

移动加热器法生长碲锌镉晶体的组分输运与界面形貌研究

移动加热器法(THM)生长碲锌镉晶体时,界面稳定性对晶体生长的质量有很大影响。本文基于多物理场有限元仿真软件Comsol建立了THM生长碲锌镉晶体的数值模拟模型,讨论了Te边界层与组分过冷区之间的关系,对不同生长阶段的物理场、Te边界层与组分过冷区进行仿真研究,最后讨论了微重力对物理场分布的影响,并对比了微重力与正常重力下的生长界面形貌。模拟结果表明,Te边界层与组分过冷区的分布趋势是一致的,在不同生长阶段,流场中次生涡旋的位置会发生移动,从而导致生长界面的形貌随着生长的进行发生变化,同时微重力条件下形成的生长界面形貌最有利于单晶生长。因此,在晶体生长的中前期,对次生涡旋位置的控制和对组分过冷的削弱,是THM生长高质量晶体的有效方案。     

Interface and defects engineering for multilayer laser coatings

High-reflective multilayer laser coatings are widely used in advanced optical systems from high power laser facilities to high precision metrology systems. However, the real interface quality and defects will significantly affect absorption/scattering losses and laser induced damage thresholds of multilayer coatings. With the recent advances in the control of coating design and deposition processes, these coating properties can be significantly improved when properly engineered the interface and defects. This paper reviews the recent progress in the physics of laser damage, optical losses and environmental stability involved in multilayer reflective coatings for high power nanosecond near-infrared lasers. We first provide an overview of the layer growth mechanisms, ways to control the microstructures and reduce layer roughness, as well as the nature of defects which are critical to the optical loss and laser induced damage. Then an overview of interface engineering based on the design of coating structure and the regulation of deposition materials reveals their ability to improve the laser induced damage threshold, reduce the backscattering, and realize the desirable properties of environmental stability and exceptional multifunctionality. Moreover, we describe the recent progress in the laser damage and scattering mechanism of nodule defects and give the approaches to suppress the defect-induced damage and scattering of the multilayer laser coatings. Finally, the present challenges and limitations of high-performance multilayer laser coatings are highlighted, along with the comments on likely trends in future.     

Surfactant self-assembly structures and multilayer formation at the solid-solution interface induces by electrolyte,polymers and proteins

Recent developments in the study of the formation of self-assembled surfactant structures and multilayers at the solid-solution interface are presented. It covers a wide range of phenomena, but in this review the main focus is on the surface structures formed from dilute solution in the presence of electrolyte and in more concentrated solutions. Their formation under those conditions are set in the wider context of the more extensive observations of their occurrence in more complex polymer-surfactant mixtures. Although the sequential adsorption methods using layer-by-layer approaches are more well established for polyelectrolytes and their associated mixtures, the main emphasis is on the self-assembly. The opportunities to manipulate wetting properties and to generate enhanced wetting characteristics are discussed. The potential applications, modifying wetting behaviour, efficient near surface reservoir for enhanced and prolonged delivery of active components, and for the development of a range of smart functionalised surfaces are highlighted.     

阳离子交换皂石黏土在基质辅助激光解吸电离飞行时间质谱分析中的应用

将一种人工合成的无机聚合物——蒙脱石皂石黏土（smectite，Sm）应用于基质辅助激光解吸电离飞行时间质谱分析（matrix-assisted laser desorption/ionization time of flight mass spectrometry, MALDI-TOF-MS），以检测糖类化合物。 将传统的有机基质2，4，6-三羟基苯乙酮（trihydroxyacetophenone, THAP）与阳离子交换后的皂石黏土混合制备成新型复合基质，应用于糖类化合物的检测。通过比较不同的制样方法，测定不同分子直径的糖类化合物，发现由于受复合基质晶面间距的限制，只有小分子糖类化合物能进入晶面间隙充分接触有机基质并被离子化，从而实现对小分子糖类化合物的选择性检测。     

Molecular and colloidal self-assembly at the oil–water interface

Self-assembly is a versatile bottom-up approach for fabricating novel supramolecular materials with well-defined nano- or micro-structures associated with functionalities. The oil-water interface provides an ideal venue for molecular and colloidal self-assembly. This paper gives an overview of various self-assembled materials, including nanoparticles, polymers, proteins, and lipids, at the oil-water interface. Focus has been given to fundamental principles and strategies for engineering the self-assembly process, such as control of pH, ionic strength and use of external fields, to achieve complex soft materials with desired functionalities, such as nanoparticle surfactants, structured liquids, and proteinosomes. It has been shown that self-assembly at the oil-water interface holds great promise for developing well-structured complex materials useful for many research and industrial applications.     

A Stable Porphyrin Functionalized Graphite Electrode Used at the Oxygen Evolution Reaction Potential

Many researches have been devoted to rechargeable power generators that can store (but also release) energy. This availability is ensured through (e. g.) the oxygen evolution reaction (OER). However, (i) large values of the overpotentials and (ii) a progressive detriment of the anode (graphite) electrode limit the ultimate device. In view of enhancing the electrode performances, graphite was protected by following different strategies, which oblige to follow precise preparation protocols. Here, we prove that a thin layer of free-base porphyrin molecules is able to protect the underneath graphite electrode from detriment even if many (about 100) electrochemical cycles are performed.     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

Electrochemical methods for analysing and controlling charge transfer at the electrode–tissue interface

There have been rapid advances in the development of new materials for use in electrode–tissue interfacing. The development of conducting polymers, conducting hydrogels, carbon nanotubes, graphene and other conducting materials has provided a rich landscape for controlling charge transfer at the electrode–tissue interface and hence to monitor and manipulate cell behaviour. These materials have been used in tissue-engineered constructs to direct and control cell proliferation, growth and differentiation. However, their translation to clinical devices has been less successful. In this review, the use of electroanalytical techniques to develop an understanding of charge transfer at the electrode–tissue interface is discussed. In particular, the impact of solution and electrode conditions on charge injection capacity is demonstrated. The importance of standardised testing methods and the correlation of electrochemical and electrophysiological performance show the limitations of empirical studies and help define key electrode properties for clinical devices. The development of a sound theoretical basis for charge transfer at this increasingly important interface is being advocated to improve clinical outcomes and device lifetime and reduce power usage.     

开关型Pickering乳液体系

Pickering乳液以胶体尺寸的固体粒子代替传统表面活性剂作为稳定剂,具有超稳定,生物相容性好以及对环境友好等优点。开关型Pickering乳液可随pH值、CO₂/N₂浓度、温度、磁场强度及光强度等条件的变化而改变固体乳化剂的表面润湿性,实现在“乳化”与“破乳”之间的快速转换,在非均相催化、乳液聚合等诸多领域有广泛的应用前景。本文全面总结了近年来开关型Pickering乳液的研究进展及其在界面催化系统、液膜处理有机废水、药物的包封与释放等方面的应用。